Sample installation guide

This is a sample article used to test the articles pipeline. The steps below are placeholders, not real fitment instructions.

Before you start

• Disconnect the battery and let the engine cool.
• Have a torque wrench, thread sealant and a clean rag ready.
• Read the shipping and returns policy if anything arrives damaged.

Steps

1. Remove the intake tube and label every hose you disconnect.
2. Fit the new flange using the supplied gasket. Do not reuse the old one.
3. Tighten the clamps to the torque in the table below.
4. Reconnect the battery and check for leaks at idle.

Watch the walkthrough

Need help?

Browse all parts or contact us with your vehicle details. Background on the process is in the R&D notes.